Oil adsorption filter cartridges have been specifically developed and manufactured for the high efficiency removal of dissolved & dispersed oils from water within the gas & oil production industries, marine bilge and ballast water treatment systems, contaminated surface water run off & other industrial process industries. Filter media of this cartridge is material containing modified cellulose. This filter media will remove upto 95% of total hydrocarbons from water in a single pass. Dissolved oil, emulsions & dispersed droplets are adsorbed and retained from water by filter media.
Features & Benefits
» Instantaneous adsorption. Better than activated carbon.
» High flow rates
» Removes dissolved and dispersed oils.
» High efficiency removal of oils
» Low pressure drop
» Media can hold 300 % of its own weight
» No release of removed hydrocarbon
» Typically, over 90% of total hydrocarbons are removed in a single pass through the cartridge with no release once adsorbed.
» Lower outlet levels of hydrocarbons can be achieved by connecting cartridges in series.
» Higher flow rates also can be achieved by connecting cartridges in parallel.
Construction
Oil adsorbing filter cartridges are made by rolling the sheet material onto a central core support. The core & outer surface of filter media rolls are covered with retaining mesh. The complete module is then encapsulated in to end caps suitable for fitting into a variety of housing configurations.
Technical Specifications
» Standard Sizes 10”, 20”, 30”, 40” Long
» Micron Rating 5, 10, 20 Micron
» Standard Outside Diameter 70 mm, 110 mm
» Inner Diameter 28 mm
Configuration
» Double Open Type (DOE Type)
Applications
» Gas and Oil facilities
» Leisure/Commercial Shipping Bilge Water
» Surface Water Run off (Truck Stops, Airports)
» Auto Service Stations\gate
» Machine Shops
» Industrial Processes
» Factories and Repair Shops
» Car and Truck Washes